Prepreg Carbon Fiber Aerodynamic Body Kit - Lamborghini Huracan STO

Give your Lamborghini Huracán STO a cohesive, motorsport-inspired exterior upgrade with the Prepreg Carbon Fiber Aerodynamic Body Kit. Designed to complement the STO’s angular bodywork and track-focused styling, this multi-piece package brings carbon fiber detailing to the front bumper, hood air ducts, side skirts, and rear fender vent areas.

Rather than upgrading individual exterior components separately, this aerodynamic body kit provides a coordinated appearance across several key areas of the vehicle. The front splitter creates a more pronounced lower front profile, while the side skirt rockers extend the visual flow along the vehicle’s sides. Additional hood duct, front bumper, and rear fender accents complete the aggressive design.

Constructed from lightweight carbon fiber, the components feature a visible carbon weave and a supplier-described high-gloss protective finish. Their sculpted shapes are intended to complement the Huracán STO’s existing aerodynamic surfaces while delivering a premium aftermarket appearance. The product is identified as a prepreg carbon fiber kit; the exact manufacturing process and material specifications should be confirmed before ordering.

Designed specifically for the Lamborghini Huracán STO, this made-to-order package is an excellent choice for owners seeking a consistent carbon fiber theme throughout the exterior. Whether preparing a show-focused build or refining the visual details of a track-inspired supercar, the kit offers a coordinated styling solution without replacing the vehicle’s complete bodywork.

Key Specs

Features

• Coordinated Carbon Fiber Body Kit: Combines several exterior enhancements into one visually consistent package, creating a unified carbon fiber theme across the front, sides, and rear fender areas of the Huracán STO.
• Premium Carbon Fiber Construction: Uses lightweight carbon fiber components with a visible woven pattern, delivering the distinctive material appearance associated with high-performance automotive design.
• Extended Front Splitter Profile: Adds a more pronounced leading edge to the lower front bumper, highlighting the STO's wide stance and aggressive front-end geometry.
• Side Skirt Rocker Enhancements: Introduces additional sculpted carbon fiber surfaces along the lower sides of the vehicle, visually connecting the front aerodynamic styling with the rear bodywork.
• Hood Air Duct Accents: Enhances the appearance of the STO's existing front hood duct openings with complementary carbon fiber components that follow their angular contours.
• Front Bumper Wide-Knife Accents: Includes additional front bumper styling pieces identified by the supplier as wide-knife components, contributing to a more detailed, track-inspired front profile.
• Rear Fender Vent Details: Adds carbon fiber elements around the rear fender vent areas to extend the coordinated styling beyond the front bumper and side skirts.
• Aerodynamic-Inspired Geometry: Features shapes intended to complement the vehicle's existing airflow-management surfaces. Actual effects on downforce, drag, cooling, or handling have not been independently quantified.
• Gloss Carbon Fiber Appearance: The supplier-described glossy finish highlights the carbon weave and creates an upscale contrast against both light and dark exterior paint colors.
• STO-Specific Design: Developed for the Lamborghini Huracán STO body style, with individual components intended to follow the vehicle's factory exterior contours.
• Made-to-Order Production: Produced to order, making it suitable for owners planning a coordinated exterior upgrade. Final material specification, component configuration, and production details should be verified when ordering.
• Complementary Styling: Can visually coordinate with other exposed carbon fiber accessories already installed on the vehicle, although exact weave and finish matching may vary between products.

Vehicle Fitment

• Make: Lamborghini
• Model: Huracán STO
• Model Years: Not Confirmed
• Body Style: Huracán STO Exterior Configuration
• Fitment Type: Vehicle-Specific Aftermarket Body Kit

Important Fitment Note: This body kit is intended for the Lamborghini Huracán STO. Compatibility with Huracán LP580, LP610, EVO, Tecnica, Performante, or other Huracán variants has not been confirmed. Verify the vehicle's model year, factory bumper configuration, existing bodywork, and current modifications before ordering.

Because this is a multi-component body kit, individual pieces may have different mounting requirements. Professional inspection and test fitting are recommended before installation or permanent attachment.

Package Includes

The supplier lists the following components as the typical kit configuration:

• 1 × Front Splitter: Carbon fiber front bumper splitter component.
• 2 × Side Skirt Rockers: Carbon fiber lower side styling components.
• 2 × Hood Air Duct Components: Carbon fiber pieces for the front hood air duct areas.
• 2 × Front Bumper Wide-Knife Components: Front bumper styling accents identified by the supplier as wide-knife pieces.
• 2 × Rear Fender Vent Components: Carbon fiber accents for the rear fender vent areas.

Total Supplier-Listed Components: 9 pieces.

Package Confirmation: The supplier describes this as a typical kit configuration. Confirm the final included pieces, left/right orientation, finish, mounting hardware, adhesives, and installation accessories before purchasing. Parts shown elsewhere on the photographed vehicles, including rear wings, wheels, mirrors, and other carbon fiber accessories, are not included unless separately specified.

Installation

• Professional Installation Recommended: Have the complete kit installed by an automotive bodywork specialist experienced with carbon fiber exterior components and high-performance vehicles.
• Inspect All Components: Before installation, check each carbon fiber piece for shipping damage, finish imperfections, mounting-point alignment, and correct orientation.
• Perform a Complete Test Fit: Position every component against its intended location before applying adhesive, drilling, removing factory hardware, or making any permanent modification.
• Prepare Mounting Surfaces: Clean mounting areas thoroughly and remove dirt, wax, grease, and other contaminants using products approved for the vehicle's paint and the component finish.
• Confirm Attachment Methods: The supplier indicates that many components are intended to work with factory mounting locations. Verify the required mounting method for each part; fasteners, bonding materials, or additional preparation may be necessary.
• Check Panel Alignment: Ensure the splitter, side rockers, hood duct components, bumper accents, and rear vent pieces sit evenly without unwanted gaps or contact with adjacent bodywork.
• Maintain Functional Clearance: Confirm adequate clearance around wheel movement, suspension travel, front ground clearance, body-panel openings, sensors, and existing aerodynamic surfaces.
• Protect the Carbon Fiber Finish: Use suitable protective materials during handling and installation to reduce the risk of scratches, edge damage, and unnecessary pressure on thin sections.
• Allow Proper Bonding Time: If an adhesive mounting system is specified, follow the adhesive manufacturer's surface-preparation and curing instructions before driving.
• Complete Final Inspection: Check the security of every installed component before road use. Reinspect mounting points periodically, particularly after track driving or contact with road obstacles.

Production & Shipping

• Lead Time: 2 weeks
• Delivery: 1 week
• Returns: Allowed within 10 days after delivery
• Replacements: Only for items damaged on arrival

Care Guide

• Clean Regularly: Wash carbon fiber components with clean water, a mild pH-neutral automotive shampoo, and a soft microfiber wash mitt to remove accumulated dirt and road grime.
• Use Microfiber Towels: Dry each component using clean microfiber towels to minimize swirl marks and surface scratches.
• Avoid Abrasive Cleaners: Do not use harsh brushes, abrasive compounds, aggressive polishing pads, or household cleaning chemicals that could damage the protective finish.
• Protect Against Sun Exposure: When possible, park in shaded or covered areas and use appropriate automotive finish protection to help preserve the appearance of the carbon fiber.
• Remove Contaminants Promptly: Clean away bird droppings, insect residue, road salt, and other potentially damaging substances as soon as practical.
• Inspect Exposed Edges: Check the splitter and side rocker edges frequently for chips, scrapes, cracks, or contact damage caused by steep driveways, road debris, and low ground clearance.
• Avoid High-Pressure Spray at Mounting Edges: Do not direct concentrated pressure-washer jets at bonded seams, exposed edges, or mounting points.
• Monitor Mounting Security: Periodically check all installed components for looseness, adhesive separation, or fastener movement.
• Use Compatible Finish Protection: Apply only waxes, sealants, or ceramic coatings suitable for the carbon fiber's actual surface finish and protective clear coat.
• Address Damage Early: If a component develops cracks, exposed fibers, or loose mounting points, have it inspected and repaired or replaced before continued use.

• Multi-piece carbon fiber aerodynamic exterior styling kit
• Front splitter, side skirt rockers, and hood air duct components
• Front bumper wide-knife and rear fender vent accents
• Visible carbon fiber weave with supplier-described gloss finish
• STO-specific design with made-to-order production